Automating Quality: How Motion Engineered a 4-Lane Vision Inspection & Splicing Platform
Project Brief
In specialised textile and tape manufacturing, maintaining material integrity is critical. A leading converter relied on a traditional, highly manual inspection process for woven tape up to 70 millimetres in width. Operators had to physically run the moving material past their hands and eyes to visually detect surface defects, manually stopping the line to cut out flawed sections.
Old System
Relying on manual, tactile inspection creates significant operational bottlenecks.
Disadvantages
- Labour-intensive and slow: inspecting a single lane of tape per operator severely capped production throughput.
- Risk of oversight: continuous manual inspection leads to operator fatigue, increasing the risk of undetected defects reaching end customers.
- No quality traceability: the process lacked digital logging, leaving manufacturers without a clear record or "roll map" of product quality for quality control databases.
- Tension disruptions: stopping the line to cut and splice material manually introduced web sag and tension loss across the roll.
New System
Motion Drives & Controls engineered a custom, fully integrated 4-lane automated vision inspection and splicing platform. Designed to process material from roll-to-roll or bin-to-roll, the machine replaces manual handling with high-speed camera optics, precise tension control, and an interactive operator splicing bench.
The system was fully built, integrated, and signed off during Factory Acceptance Testing (FAT) at Motion's facility in Warwick before deployment and installation on the client's production floor.
How the system operates: step by step
1. Multi-lane unwind and load cell priming
The system processes up to four separate tape lanes simultaneously. Operators initiate the line via an automated priming cycle. Load cells within the tension zone verify that proper web tension is established before the line runs. Visual beacon lights transition from red to amber/green to confirm lane status.
2. Dual-configuration automated vision inspection
Driven through a precision nip, the tape enters the high-speed vision zone. The camera architecture offers flexible path configuration:
- Single-side inspection: direct line-of-sight visual tracking.
- Dual-side inspection: utilises an integrated turn-bar system to flip the tape, allowing the cameras to inspect both sides of the material in a single pass.
3. Automated defect spotting and tension-isolated splicing
When the vision system identifies a flaw:
- The machine automatically stops and reverses the affected lane, placing the defect precisely onto the integrated splicing table.
- The large HMI prompts the operator with a visual review of the defect, asking to "Accept" or "Decline" the fault.
- Pneumatic tension clamp: a dedicated clamp engages on the splice table, isolating web tension between the rewind stand and the cutting bench. This allows the operator to safely cut out the flaw, rejoin/restitch the tape, and resume operation without losing system tension or disturbing adjacent lanes.
4. Advanced HMI control and roll mapping
Throughout the run, the central touchscreen tracks real-time operational parameters:
- Line speed, active tension, unwind/rewind diameters, and consumed roll percentage.
- Pass/fail statistics and defect frequency logging.
- Digital roll mapping: the system automatically generates a complete digital map of defect locations across the entire roll build. This data is saved directly to the database, giving end customers and suppliers verified proof of quality.
Why it worked: the Motion advantage
This project highlights Motion Drives & Controls' strength as a single-source system integrator rather than a basic parts supplier.
By combining leading power transmission and web control components directly from Motion's distribution portfolio, including Magpowr tension systems, WEG drives, and WEG gearboxes, our engineering team built a cohesive solution backed by deep component-level knowledge. This ensures optimal performance out of the box, backed by single-point technical support and long-term aftermarket reliability.
Have a complex web handling or automated inspection challenge? Contact Motion Drives & Controls to discuss a bespoke engineering solution tailored to your line.
Advantages
- 4x inspection throughput: a single operator can now manage four inspection lanes simultaneously, drastically reducing labour costs and clearing production bottlenecks.
- Zero-defect quality assurance: automated vision optics eliminate human error, ensuring consistent defect detection at high operating speeds.
- Complete digital traceability: automated roll mapping provides verifiable quality records for every batch produced.
- Reduced material waste: controlled tension isolation prevents web damage during splicing, preserving roll structure and reducing scrap.